The Magnet Validation Process
If you want to learn more, please visit our website Horizon.
Are you interested in booking in a validation, but are not sure what to expect? This blog post will give you a detailed run-down on the HSMAG magnet validation procedure and reports.
HSMAG Magnet Validations are designed to be very simple for the client.
Once the validation date is booked in, a technician visits the site and conducts the testing of magnets. Various factors are taken into consideration, including magnet strength, product stream coverage, positioning/installation, condition of magnet, type of product, purpose of the magnet, as well as any unprotected locations or needs for additional protection. If necessary, an in-depth risk analysis can be conducted on the processing line to help identify any other areas where there is a high risk of metal contamination.
The magnet testing time is minimal, and your production schedule is taken into account to minimize disruption. The approximate downtime is usually 5-15 minutes, and in some instances, the line will need to be isolated.
The technician notes important information as they carry out the testing of each separator, and once finished on-site, these notes are forwarded on to the HSMAG office to be compiled into a HACCP-Certified report.
Our reports will tell you everything you need to know and more, as we believe it is crucial to provide our clients with all of the information regarding their magnets.
In compliance with the HACCP International Food Safety Standard MAGSEP 1-, HSMAG use currently calibrated gauss meters to obtain magnet strength, rather than dated and often inaccurate pull test methods. More information on this topic can be found here.
Risk assessments and recommendations based on the current MAGSEP Standard are included for high-risk areas/critical control points where possible metal contamination issues may arise.
If you have any questions, please do not hesitate to contact us.
Radial 12-Poles Ring Ferrite Magnets for Velocity Sensor
Hall Sensor Ferrite Radial 6-pole Magnetization Magnetic Ring
Sintering Samarium Cobalt Disc Sensor Magnets
If you want to learn more, please visit our website Formworks Button Magnet.
Radial Ferrite 24 poles Motor Encoder Hall Sensor Ring Magnets
Plastic Bonded Ferrite 4 Poles Flow Sensor Magnets
Radial Multipole Flow Sensor Rotor Magnets
Water Flow Sensor Magnets
N35AH N35EH Small Arc Laminated NdFeB Magnets for Motor
Blue Plastic Capped Whiteboard Refrigerator NdFeB Magnets
1/2&#; dia. x 1/4&#; thick Red Strong Permanent NdFeB Magnets Coated with Hard Polypropylene
Yellow Plastic Coated Office Magnetic Whiteboard Dry Erase Board NdFeB Magnets
Blue Round Plastic Housing NdFeB Magnets for Office Home
Yes, both formworkers can be used with laser systems and formwork robots. Storage can also be automated via side recesses.
1. are the formwork &#; U and H profiles &#; compatible with laser systems or formwork robots?
2. is it possible to use the formwork without a robot?
Yes, the formers can also be used without machine support.
If you are looking for more details, kindly visit Precast Concrete Magnet Box.